Case Studies

A major chemical company found itself facing costly condensation leaks at its Canadian isopropyl alcohol manufacturing facility.  Not only did water condensing into a lubricant tank have to be drained up to three times per day, it also led to equipment shutdowns that could shut down the plant for a full week.  The Colfax THERMOJET Oil Purifier was installed and reduced water content from 0.95% to 0.019%

January 4th 2011

Moving crude oil along pipelines from the oil patch in Northern Canada to central blending facilities is a tough, time-consuming process through some of this hemisphere's most demanding environments. It's a job that requires not just high pumping efficiency but equipment that can reliably stand up to the harshest conditions...

July 13th 2009

French oil company Maurel et Prom needed to install a new series of pumps capable of transporting viscous oil from one of its oil-field production plants to a refinery more than 145 kilometers (km) away. Normally that would be challenge enough, but in this case the distance between the field and the refinery covered some of the harshest landscapes in all of Africa...

April 29th 2009

Moving heavy, sand-laden crude oil through its pipelines had always been a tough challenge for a large oil producer located in Venezuela. Because of high levels of basic sediment and water (BSW) in the crude oil, the company's mainline transfer pumps would gradually lose capacity and require rebuilding every three to four months...

January 27th 2009
Colfax application engineering experts