Product Brochures
Market and Product Type Brochures
Colfax Chemical Processing Market Solutions
Colfax Fluid Handling stands ready to deliver what you need‚ not just with pumps and related equipment‚ engineering and design expertise‚ market know-how and technical savvy‚ but also with a solution that helps you attain your critical manufacturing objectives.
Colfax Progressing Cavity Pumps
ALLWEILER supplies various pump types for horizontal‚ vertical and wet well installations. The pump design‚ bearing assembly‚ type of shaft seal‚ and the material selection can be adapted to optimally suit each particular application.
Colfax Three Screw Pumps
The Imo and Allweiler lines of three-screw pumps and systems deliver the features that matter most to you. Longer life‚ lower pressure ripple‚ lower contamination sensitivity and maximum energy savings result in the highest “Total Savings of Ownership” across the entire life-cycle of your pumping equipment solution.
Centrifugal Pumps
ALLMAG
Volute Casing Centrifugal Pump with Magdrive in base plate design. Heat transfer liquids‚ water (hot water‚ condensate‚ cooling water etc.)‚ aggressive liquids.
ALLHeat
Your pumping requirements demand safe‚ reliable transfer of high temperature materials including heat transfer fluids and hot water without the need for costly auxiliary cooling or expensive shaft sealing systems. The ALLHEAT® series centrifugal pump was designed specifically for safe pumping of hot fluid medias.
ALLHeat CIWH
Volute Casing Centrifugal Pump in in-line design. Heat transfer liquids‚ water (condensate‚ hot water‚ cooling water etc.)
ALLHeat CBWH
Volute Casing Centrifugal Pump in block design. Heat transfer liquids‚ water (condensate‚ hot water‚ cooling water etc.)
Imo NSS Series
The NSS series centrifugal pump is intended for vertical‚ tank mounted lubrication services where medium to large flow rates are required at relatively low discharge pressures.
ALLChem CNH-B
Volute Casing Centrifugal Pump in base plate design. For handling aggressive or non aggressive‚ cold‚ pure or with solid contents‚ also viscous liquids‚ heat transfer liquids.
ALLHeat CTWH
Volute Casing Centrifugal Pump in base plate design. Heat transfer liquids‚ water (condensate‚ hot water‚ cooling water etc.)
ALLChem CNB
Volute Casing Centrifugal Pump in block design. For handling aggressive or non aggressive‚ cold‚ pure or with solid contents‚ also viscous liquids‚ heat transfer liquids.
ALLChem CNI
Volute Casing Centrifugal Pump in in-line design. For handling aggressive or non aggressive‚ cold‚ pure or with solid contents‚ also viscous liquids‚ heat transfer liquids.
Propeller Pumps
ALLPro PPR
For handling with non-aggressive or aggressive fluids‚ uncontaminated or loaded with solids‚ cold or hot liquids.
External Gear Pumps
Zenith 9000 Series
Your demanding application requires a precise volume of fluid dispensed – reliably‚ accurately and consistently. The Zenith 9000 Series metering gear pump is the industry standard for true precision metering for challenging applications in a wide variety of industrial processes.
Zenith H Series
Zenith Pumps offers a rotary external gear pump of unique precision and simplicity. The pump’s design of only three moving parts–two metering gears and a drive shaft–provide long life and easy maintenance.
Zenith PEP II Gear Pumps
The PEP-II’s unique positive displacement design provides consistent‚ accurate polymer delivery under varying extruder output conditions of pressure‚ temperature and viscosity.
Zenith Spin Finish Gear Pumps
Spin Finish pumps are used to meter finish solutions in a precise‚ pulseless flow to be applied on man-made fibers such as polyester‚ nylon‚ polypropylene‚ acetate and rayon. Spin Finish metering pumps are available in a wide range of capacities and number of discharge ports and are suitable for most man-made fiber finishing solutions.
Zenith Planetary Gear Pumps
From the earliest applications in viscose and hot-melt fiber spinning‚ through the more recent applications in high performance‚ specialty fibers‚ Zenith Pumps has met the challenges of the fiber industry with pumps of unmatched performance and quality.
Zenith Flushable Pumps
Zenith Pumps for Paints and Coatings allow dependable control of critical coating applications. High accuracy eliminates costly over-application associated with less accurate methods‚ and the pumps often pay for themselves in savings in one year or less.
Peristaltic Pumps
ALLMove ASL
Peristaltic Pump for low pressure applications. Low to highly viscous liquids‚ pasty‚ neutral or aggressive‚ pure or abrasive‚ gaseous or tending to froth‚ also with fibrous and solids content.
ALLMove ASH
Peristaltic Pump for high pressure applications. Low to highly viscous liquids‚ pasty‚ neutral or aggressive‚ pure or abrasive‚ gaseous or tending to froth‚ also with fibrous and solids content.
Progressing Cavity Pumps
Allweiler AE Series
Self-priming‚ two or four-stage‚ rotary positive displacement pump. Conveying elements are the rotating eccentric screw (rotor) and the fixed stator.
Two-Screw Pumps
Warren Jaguar Series
The solid cast body is generously ribbed and has thick cross sections resulting in increased rigidity. The suction flow passage is designed to provide a constant area from the flange opening to the screw entrance allowing for the best NPSH capabilities of any similarly sized pump.
Houttuin 136.20
The Houttuin single entry twin screw pumps series 136 are horizontal rotating self priming positive displacement pumps. Two intermeshing screws rotating in a pump casing ensure high pumping efficiency with constant axial flow and unequalled suction power.
Warren GTS Series
Improved screw profiles and geometry provide better efficiency than competitors’ designs.
Warren FXSA Series
Hardened steel double helical timing gears are used to prevent metal-to-metal contact between the meshed rotating screws. The clearance between the pumping screws results in longer pump life and higher average efficiencies over the life of the pump.
Houttuin 211.10
The Houttuin double entry twin screw pumps series 211 are vertical rotating self priming positive displacement pumps. Two intermeshing screws rotating in a pump casing insert ensure high pumping efficiency with constant axial flow and unequalled suction power.
Three-Screw Pumps
Imo ACE Series
The ACE pump is used for a number of different fluids: Lubrication oil‚ fuel oil‚ vegetable oil‚ hydraulic oil and other hydraulic fluids‚ polymers‚ emulsions and any non-aggressive fluid with sufficient lubricating properties.
Allweiler EMTEC Series
Emtec pumps are designed to withstand the harsh environments of high pressure machine tool coolant service.
Imo 3E Series
Imo Model 3E pumps are three screw‚ positive displacement‚ rotary pumps designed and engineered for excellent suction capability over a wide range of fluid viscosities.
Imo 6T/6U Series
Imo Model 6T and 6U pumps are positive displacement‚ rotary‚ screw-type pumps designed and engineered for excellent suction capability over a wide range of fluid viscosities.
Imo 3G Series
The 3G series pump is intended for use in lubrication‚ hydraulic and control oil services such as those found on rotating machinery or other equipment needing forced lubrication‚ circulation‚ fluid transfer‚ distillate fuel burner or similar systems.
Imo ACG Series
The ACG pumps are used for a number of different fluids: Lubrication oil‚ fuel oil‚ vegetable oil‚ hydraulic oil and other hydraulic fluids‚ polymers‚ emulsions and any non-aggressive fluid with sufficient lubricating properties.
ALLlub RUV
Three-Screw pump up to 16 bar‚ vertical submerged installation. Hydraulic oils‚ synthetic hydraulic liquids‚ native oils‚ lubricating oils.
Imo 3D Series
Series 3D is a general purpose three screw pump available in 19 different displacements. These pumps incorporate full hydraulic balance which cancels axial and radial thrust loads due to discharge pressure.
Imo 6D Series
Series 6D Imo pumps are intended for relatively high pressure service on petroleum or similar viscosity liquids.
Imo 12D Series
Ductile iron cased three screw pump for high pressure (2500 psi or 178 bar) applications.
Allweiler SM Series
Owing to a special profiling of the flanks of the screw threads‚ the three spindles form sealed chambers‚ the contents of which are axially and completely continuously shifted from the suction to the delivery side of the pump.
Allweiler SN Series
The SN series from ALLWEILER is utilized in all segments of industry where lubricating liquids are pumped that do not contain abrasive components and will not chemically attack the pump materials.
Imo 8L Series
Three screw pump with high shock capacity for 2900 gpm in high pressure applicatons.
Imo 323F Series
Double ended rotary three screw pump designed for excellent suction capabilities over a wide range of fluid viscosities.
Imo 324A Series
Double ended rotary three screw pump designed for high temperature applications such as asphalts and vacuum tower bottoms.
Imo T324N Series
Double ended rotary three screw pump designed for excellent suction capabilities with flow rates up to 800 gpm.